| TECHNICAL DATA | |
| Power Source | 100-240V~50/60Hz |
| Rated load current | 4.2A for lamps and resistive loads 1.7A for motors with compensated power factor (inductive loads) |
| Supported motor type | single-phase AC motors |
| Required limit switches | electronic and mechanic |
| Power consumption | up to 0.8W |
| Operating temperature | 0°C – 35°C |
| Active element | micro-gap relay switch µ |
| For installation in boxes | = 50mm, depth >= 60mm”}” data-sheets-textstyleruns=”{“1″:0,”2”:{“3″:”Arial”,”4″:8}}”>Ø >= 50mm, depth >= 60mm |
| Radio protocol | Z-Wave (500 series chip) |
| Radio frequency | 868.4 or 869.8 MHz EU 908.4, 908.42 or 916.0 MHz US 921.4 or 919.8 MHz ANZ 869.0 MHz RU |
| Range | up to 40m (131 ft) (depending on building structure) |
| Outside dimmensions (L x W x H) | 42.5mm x 38.25mm x 20.3mm |
| Compliance with EU directives | RoHS 2011/65/EU RED 2014/53/EU |
| ECO PACKAGING / NEW | |
| UNIT PACKAGE | |
| Weight | 0.045 kg |
| Length | 6.5 cm |
| Width | 6.5 cm |
| Height | 3.0 cm |
| Pieces | 1 |
| COLLECTIVE PACKAGE | |
| Weight | 2.4 kg |
| Length | 34.0 cm |
| Width | 21.0 cm |
| Height | 10.5 cm |
| Pieces | 45 |
| PAST PACKAGING / NON-ECO | |
| UNIT PACKAGE | |
| Weight | 0.061 kg |
| Length | 6.5 cm |
| Width | 6.6 cm |
| Height | 4.6 cm |
| Pieces | 1 |
| COLLECTIVE PACKAGE | |
| Weight | 2 kg |
| Length | 34.0 cm |
| Width | 21.0 cm |
| Height | 10.5 cm |
| Pieces | 30 |
FIBARO Roller Shutter 3
FGR-223
FIBARO Roller Shutter 3 is a device designed to control roller blinds, awnings, venetian blinds, gates and other single phase, AC powered devices. Roller Shutter 3 allows for precise positioning of roller blinds or venetian blind lamellas. The device is equipped with power and energy monitoring. It allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.
Features
- Compatible with Z-Wave and Z-Wave+ Controllers,
- Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2
- Authenticated with PRNG-based encryption,
- To be installed with roller blind motors with electronic or mechanical limit switches,
- Advanced microprocessor control,
- Active power and energy metering functionality,
- Works with various types of switches – momentary, toggle and dedicated roller blind switches,
- To be installed in wall switch boxes.
| Brand | FIBARO |
|---|
