FIBARO RGBW Controller 2

FGRGBW-442

Universal, Z-Wave compatible RGB / RGBW controller. FIBARO RGBW Controller may control LED strips, RGB / RGBW LEDs and 12V – 24V powered light sources. In addition the device supports up to four, 0V – 10V analogue sensors, such as temperature sensors, humidity sensors, wind sensors, air quality sensors, light sensors etc. All IN and OUT terminals may be user configured for LED control or 0V-10V signal readouts. May be used as a dimmer with Halogen lamps.

Features

  • Current and historical power consumption measuring
  • Controlled through other FIBARO devices or any Z-Wave controller, 
  • Microprocessor controlled,
  • Most advanced device of this type in the World.
Login for pricing
SKU: 701581 Category:

Power supply: 12/24V DC ±10%
Rated load current: 6A for channel,
12A total for all outputs
Power output: 144W combined for 12V
288W combined for 24V
Inputs: 4 inputs, 0-10V (configurable pull-up) or binary
Outputs: 4 outputs, PWM
PWM frequency: 244Hz
Maximum length of wires: 2m
Operating temperature: 0–40°C (32–104°F)
Storage temperature: -40–60°C (-40–140°F)
Radio protocol: Z-Wave (500 series chip)
Radio frequency: 868.4 / 869.85 MHz EU;
908.4 / 916 MHz US;
919.8 / 921.4 MHz ANZ;
869.0 MHz RU;
Transmit power: EIRP max. +2dBm
Range: up to 50m (164 ft) outdoors
up to 40m (131 ft) indoors
(depending on terrain and building structure)
Recommended wire cross-section area 0.2–2.0mm2 (24–14 AWG)
(depending on load current)
Dimensions (Length x Width x Height): 42.35 x 36.90 x 17.5 mm
(1.67” x 1.5” x 0.69”)
Compliance with EU directives RoHS 2011/65/EU
RED 2014/53/EU

Manual

Download

FGRGBW-442-T-EN-Trantech

Copyright © 2021 Trantech: Security Wholesaler. All Rights Reserved.

Search
×